| 0 |
1 if this is the master position (i.e. record 29 position) |
| 1 |
1 if the solution is a propagated solution (e.g. PM_FIX_20_HZ) |
| 3 |
1 if reference station is sending moving base CMRs. Only b0 and b1 of "rtkMode" are defined in Record 29, in the rtk block "mode" field. |
| 4 |
rtkMode bit 0: 0=synchronized rtk solution; 1=low-latency rtk solution; |
| 5 |
rtkMode bit 1: 0=no canopy detected; 1= canopy detected; |
| 6 |
1 if a baseline length constraint was used to form RTK vector. |
| 7 |
1 if a clock constraint was used to form RTK vector. |
| 8 |
1 if the RTK position is bridged |
| 9 |
1 if the OmniSTAR position is authenticated |
-B1_snr_vs_time.png)
-B1_snr_vs_time.png)
-B3_snr_vs_time.png)
-B3_snr_vs_time.png)
-B2_snr_vs_time.png)
